SWOMP KITS
The highest quality, best performing longtails — in kit form! Our SWOMP kits will have you up and running in no time. Everything is included for easy assembly and fits a large assortment of engines including Vanguard, Kohler, Honda, Subaru, Predator and Honda clones.
SWOMP Lite Kits
|
3 - 7 HP Ultra-Lite Kit - $1095
The Ultra Lite Kit weighs in at 25lbs 9oz complete with everything needed except for the motor. It includes quality mounting hardware and even the key stock for the engine. This kit comes standard with all the features waterfowl hunters have come to depend on from Backwater like the Revo-Clean triple bearing system and Surface Tracer cavitation plate. We set out to make the lightest frame in this horsepower range, but we didn't sacrifice what has made Backwater motors the best longtails made. To accomplish this we built the frame with a thinner wall (yet ultra strong) DOM tube and created a dual-density driveshaft using a hollow upper section mated to solid 4140 for the lower bearing and prop end. Other unique features include a lightweight upper bearing housing and bell housing adapter, billet aluminum handle mounts, and a quick release function allowing separation from the Versa-Mount for easy transport. Features:
|
Note: This kit comes standard with a lever throttle. Paddle throttle shown in photos is optional.
SHAFT LENGTH RECOMMENDATIONS: · 55" SHAFT for sneak boats or boats with transoms 15" or less · 65" SHAFT for 15" to 17" transoms · 77" SHAFT for transoms 18" or more ENGINE COMPATIBILITY This kit is compatible with most 3-7 HP engines. For example it can be paired with a Honda GX120 Honda GC160, Honda GX200, Briggs and stratton/Vanguard 6.5HP Predator 212CC and Predator 79CC (request special coupler). If you know what engine you intend to use please note it in checkout. |
|
4 - 7 HP kit - $1095
Available in two configurations: - 55" S.W.O.M.P LITE (AKA SNEAK LITE, optimal for sneak and layout boats) - 34 lbs (40 lbs with Versa-Mount) - 65" S.W.O.M.P LITE - Weight 38 lbs (44 lbs with Versa-Mount) Features:
8 - 11 HP kit - $1295 Available in three configurations: - 55" S.W.O.M.P LITE (AKA SNEAK LITE, optimal for sneak and layout boats) - 36 lbs. (42 lbs with Versa-Mount) -65" S.W.O.M.P LITE - 40 lbs. (46 lbs with Versa-Mount) -77" S.W.O.M.P LITE - 44 lbs (60 lbs with Versa-Mount) Features:
12 - 16 HP kit - $1495 Available in three configurations: - 55" S.W.O.M.P LITE (AKA SNEAK LITE, optimal for sneak and layout boats) - 37 lbs. (51 lbs with Versa-Mount) - 65" S.W.O.M.P LITE - 41 lbs. (55 lbs with Versa-Mount) -77" S.W.O.M.P LITE - 45 lbs (61 lbs with Versa-Mount) Features:
|
SHAFT LENGTH RECOMMENDATIONS:
· 55" SHAFT for sneak boats or boats with transoms 15" or less · 65" SHAFT for 15" to 17" transoms · 77" SHAFT for transoms 18" or more |
SWOMP V-Twin Kits
|
V-Twin 13 - 24 HP kit - $1995
Available in two configurations: - 65" S.W.O.M.P LITE - 52 lbs. (66 lbs with Versa-Mount) - 77" S.W.O.M.P LITE - 57 lbs. (71 lbs with Versa-Mount) Features: -Upper brace designed to handle larger HP weight and power -5" bolt circle mounting flange, 1” output coupler -Large HP Versa-Mount -Motor plate with handle mount -Prop to match your HP (specify when ordering) |
SHAFT LENGTH RECOMMENDATIONS:
· 65" SHAFT for 15" to 17" transoms · 77" SHAFT for transoms 18" or more |
The V-Twin Kit will fit these engines:
-Vanguard V-Twin 13 -Honda GX 630
-Vanguard V-Twin 16 -Honda GX 660
-Vanguard V-Twin 18 -Honda GX 690
-Vanguard V-Twin 20 -Most Honda Clones Including Harbor Freight Predator 22 HP
-Vanguard V-Twin 23
-Vanguard V-Twin 13 -Honda GX 630
-Vanguard V-Twin 16 -Honda GX 660
-Vanguard V-Twin 18 -Honda GX 690
-Vanguard V-Twin 20 -Most Honda Clones Including Harbor Freight Predator 22 HP
-Vanguard V-Twin 23
SWOMP Big Block Kits
|
Big Block kit - $2350
Available in two configurations: 65" or 77" Features:
The Big Block Kit will fit these engines: - Kohler 25 HP+ - Vanguard 25 HP Big block - Vanguard 35 HP - Vanguard 37 HP - Vanguard 40 HP - Clone engines with matching specs |
SHAFT LENGTH RECOMMENDATIONS:
· 65" SHAFT for 15" to 17" transoms · 77" SHAFT for transoms 18" or more PROP SELECTION: 9X7 for 26-35 HP 10x6 for 36-44 HP |
Kit Assembly video
All kits come with Backwater's Patented Versa-Mount™ Adjustable transom mount
Check out the install video below!
|
|
All Backwater motors and kits have these standard features:
- Precision Machined Aluminum PTO Housing (no welds, extremely precise fitment) - 360° Swivel Transom Mount with 3 point locking system - Triple-sealed long-life lower bearing system In Stainless Steel Housing - Revo-Clean™ System keeps debris out of lower housing - Backwater Blade™ Stainless Super weedless propeller - Surface Tracer CT™ cavitation plate |
